Why you need a LED Flat Panel Light

Led Flat Panel is made by the Led light. The light source of the Led flat panel light is high brightness white led light or warm white led light with  some features such as high effective, low power, long life, easy to control, non-maintenance, safe and environmental etc. It is a new cold light source.
The Led panel light can be used in hospital, office, bank, hotel and some other place that indoor. For more features, pls read the commonets as below :
1, LED panel light energy efficient: the degree of electricity consumption is only 1000 hours (normal 60W incandescent light 17 hours of electricity consumption of an ordinary 10W energy saving lamp 100 hours of electricity consumption of 1)
2, LED panel light and long life: light-emitting semiconductor chip, no filament, no glass bulbs, not afraid of vibration, less breakable, life of up to 50,000 hours (incandescent life of only 1000 hours, ordinary life is alsoenergy-saving lamps Only 8000 hours)
3, LED panel light is health light: light healthy does not contain ultraviolet and infrared light, does not produce radiation (ordinary light contains ultraviolet and infrared ray)
4, Green products, environmental: Led panel light is not harmful elements such as mercury and xenon, conducive to Centrifugal Fan recovery and, it does not produce electromagnetic interference (ordinary lamps contain mercury and lead, elements,energy saving lamp electronic ballasts will produce electromagnetic interference)
5, Protection of eyesight: DC drive, no strobe (ordinary light are AC drive, will inevitably produce strobe)
6, Light efficiency is high: fever small, 90% of the electrical energy into visible light (80% of normal incandescent heat into electricity, only 20% of the electrical energy into light energy) 

7, High safety factor: LED panel light required voltage, current is small, less heat, not produce safety hazards, mines and other dangerous places in the 14, impact resistance, anti-Lei Lijiang, no ultraviolet (UV) and infrared ( IR) radiation. No filament and glass case, there is no fragmentation of the traditional lamp problem, the human body without harm, no radiation.
8, low thermal voltages: safe and reliable. Surface temperature ≤ 60 ℃ (Ta = 25 ℃ ambient temperature when);
9, Wide voltage range over the globe. 85V ~ 264VAC full voltage range constant current, ensure the life and brightness from voltage fluctuations;
10, Using constant-current PWM technology, high efficiency, low calorie, high precision constant current;
11, LED Panel light reduce line loss, pollution-free power grid. Power factor ≥ 0.9, THD ≤ 20%, EMI meet global targets to reduce the power supply line power loss and to avoid pollution of the power of high frequency interference;
12, Common Criteria can directly replace the existing grille light
13, the market potential: low voltage, DC power supply, battery, solar power, in remote mountainous areas and field lighting electricity, less electricity places.
LED Panel light source lighting market in the 21st century of hope, notice the many benefits of its future will gradually replace the traditional light source, high brightness LED oko committee that will be the man, after following the Edison incandescent light bulbs, one of the greatest inventions, the current global energytimes of crisis, energy is a valuable resource, saving energy is our future problems.
LED Flat Panel light, as a new energy-saving, environmentally friendly products the green light, must be the future Hydraulic Fittings trend.

RAB Lighting Introduces the LPANEL Line of Affordable LED Panels

RAB Lighting announces the availability of LPANEL, its new line of LED panel fixtures. Designed with high performance and affordability in mind, the new LPANEL products deliver ultra smooth edge-to-edge light in a modern design. LPANEL breaks new ground in efficiency delivering up to 106 lm/W.

RAB is serious about consistent color. The LEDs in PANEL fixtures are binned for 3-step consistency and are warranted for no more than a 200K shift over a 5-year period. At 10 hours average daily use, RAB LEDs are rated to last 27 years, which dramatically reduces the time and expense associated with re-lamping traditional fluorescent fixtures.RAB LPANELs are offered in three sizes (2x2, 2x4 and 1x4), three color temperatures (warm, warm/neutral and neutral) and several lumen packages to suit every application. Many LPANEL models are DesignLights Consortium® (DLC) approved and significant rebates can be obtained from local utilities. For even more savings, LPANEL is available with an optional dimmable driver that delivers full-range dimming from a 0-10V control signal.

RAB’s 5-year no compromise warranty covers light output, color stability, driver performance and paint finish. Simple, comprehensive and valuable, the RAB LED Warranty ensures that your investment is protected.

All LPANEL fixtures feature a modular splice box/driver compartment and integral T-bar clips for easy, secure installation. An emergency backup option is also available to provide emergency lighting when power is lost.

LEDLink and Edison Enter Hand in Hand into Backlight Market

Secondary optics lens manufacturer LEDlink passed Edison’s direct backlight product certification in August for LEDlink’s direct backlight OD 22mm and 30mm standard sized secondary optic lenses. By passing the certification, the optic lens can also be used in panel lighting. The two companies now plan to make their way into the direct backlight market.

Taiwan LED packaging manufacturer Edison and Secondary Optics Lens manufacture LEDlink have a very close relationship. After changing its focus in the LED lighting market, Edison established a backlight production chain at their Yangzhou factory. The factory can produce about 1.2 million Light Bars (LED light strips) monthly. Edison remarked that their current production capacity is still small.

Following Edison’s entrance into the backlight market, the company watched whether or not LEDlink would also follow suit. LEDlink pointed out that their secondary optic lens have already pass Edison’s direct backlight product certification and has the opportunity in the future to provide Edison with OD 22mm and 30mm secondary optic lens needed for direct backlight products showing that LEDlink hopes to enter together with Edison into the direct backlight market.

LEDlink Chairman Tang Delong pointed out that LEDlink is staying cautious with its cross over into the direct backlight market due to numerous competitors. Therefore they are cutting into large shipments in the initial stages of new products. However, competitors developing similar products bring added pressure, so the core of LEDlink is still small-volume large-variety production within the LED lighting market.