Why you need a LED Flat Panel Light

Led Flat Panel is made by the Led light. The light source of the Led flat panel light is high brightness white led light or warm white led light with  some features such as high effective, low power, long life, easy to control, non-maintenance, safe and environmental etc. It is a new cold light source.
The Led panel light can be used in hospital, office, bank, hotel and some other place that indoor. For more features, pls read the commonets as below :
1, LED panel light energy efficient: the degree of electricity consumption is only 1000 hours (normal 60W incandescent light 17 hours of electricity consumption of an ordinary 10W energy saving lamp 100 hours of electricity consumption of 1)
2, LED panel light and long life: light-emitting semiconductor chip, no filament, no glass bulbs, not afraid of vibration, less breakable, life of up to 50,000 hours (incandescent life of only 1000 hours, ordinary life is alsoenergy-saving lamps Only 8000 hours)
3, LED panel light is health light: light healthy does not contain ultraviolet and infrared light, does not produce radiation (ordinary light contains ultraviolet and infrared ray)
4, Green products, environmental: Led panel light is not harmful elements such as mercury and xenon, conducive to Centrifugal Fan recovery and, it does not produce electromagnetic interference (ordinary lamps contain mercury and lead, elements,energy saving lamp electronic ballasts will produce electromagnetic interference)
5, Protection of eyesight: DC drive, no strobe (ordinary light are AC drive, will inevitably produce strobe)
6, Light efficiency is high: fever small, 90% of the electrical energy into visible light (80% of normal incandescent heat into electricity, only 20% of the electrical energy into light energy) 

7, High safety factor: LED panel light required voltage, current is small, less heat, not produce safety hazards, mines and other dangerous places in the 14, impact resistance, anti-Lei Lijiang, no ultraviolet (UV) and infrared ( IR) radiation. No filament and glass case, there is no fragmentation of the traditional lamp problem, the human body without harm, no radiation.
8, low thermal voltages: safe and reliable. Surface temperature ≤ 60 ℃ (Ta = 25 ℃ ambient temperature when);
9, Wide voltage range over the globe. 85V ~ 264VAC full voltage range constant current, ensure the life and brightness from voltage fluctuations;
10, Using constant-current PWM technology, high efficiency, low calorie, high precision constant current;
11, LED Panel light reduce line loss, pollution-free power grid. Power factor ≥ 0.9, THD ≤ 20%, EMI meet global targets to reduce the power supply line power loss and to avoid pollution of the power of high frequency interference;
12, Common Criteria can directly replace the existing grille light
13, the market potential: low voltage, DC power supply, battery, solar power, in remote mountainous areas and field lighting electricity, less electricity places.
LED Panel light source lighting market in the 21st century of hope, notice the many benefits of its future will gradually replace the traditional light source, high brightness LED oko committee that will be the man, after following the Edison incandescent light bulbs, one of the greatest inventions, the current global energytimes of crisis, energy is a valuable resource, saving energy is our future problems.
LED Flat Panel light, as a new energy-saving, environmentally friendly products the green light, must be the future Hydraulic Fittings trend.

2016 Summer Olympic and Paralympic Headquarters Incorporates Energy- and Maintenance-Saving GE LED Fixtures

LED fixtures at Rio de Janeiro site will save half a million dollars in energy costs compared to fluorescent technology

The modular headquarters of the Organizing Committee for the 2016 Rio de Janeiro Olympic and Paralympic Games is the first commercial building in Brazil to adopt GE Lighting’s Lumination™ ET Series Recessed LED Troffer, an ultra-thin fixture as thin as the width of a finger that brings modern styling to traditionally uninspired commercial ceiling spaces.

LED fixtures at Rio de Janeiro site will save half a million dollars in energy costs compared to fluorescent technology.

Approximately 3,000 Lumination ET Series Troffers offer an indoor lighting solution with lower energy consumption, longer life and lower greenhouse emissions resulting from power consumption compared with other options available in the market. The technology will help make the headquarters of 2,000 employees a benchmark in the search for more efficient solutions in the sports field and also will create an important legacy in infrastructure and technology for Rio de Janeiro and Brazil.

"LED technology plays a fundamental role in the model that sustains the environmentally conscious construction of the new headquarters for Rio 2016,” says Alexandre Ferrari, general manager of GE Lighting in Brazil. “We worked in partnership with Rio 2016 and the International Olympic Committee to create and enable a solution that combines energy efficiency, innovation and long-term, tangible benefits.”

By opting for the GE LED solution, Rio 2016 will save nearly half a million dollars on its energy bills over the four years the building will be used by the Organizing Committee. During this period, maintenance costs will be marginal, as the fixtures have an 11-year lifespan, approximately 120 percent longer than conventional fluorescent fixtures that last about five years.

"The headquarters of the Organizing Committee for the Olympic and Paralympic Games Rio 2016 is a project that seeks to use best practices in the adoption of energy-efficient technologies and solutions, creating an important and lasting legacy for the Brazilian society,” says Leonardo Gryner, operations general director for Rio 2016, “GE is certainly a strategic partner that contributed directly to achieving the goals of this initiative.”

The innovative design of the Lumination Luminaires allows greater lighting uniformity with fewer lighting points. When illuminated, the Lumination ET Series Recessed LED Troffers produce a perfectly even glow, delivering exceptionally uniform light to fill the space. While off, they appear free of a light source, while fluorescent fixtures are typically visible. The ultra-thin panels (0.5 inches) fit seamlessly in most common T-bar ceiling grids and feature a built-in dimmable LED driver to help make installation less complex and time consuming compared to traditional fixtures. As the Rio 2016 headquarters is a modular construction, the LED solutions will be available for future use after the closing of the Rio 2016 Olympic Games.

The lighting design for this building was completed by Peter Gasper, a well-known lighting designer for several major Brazilian landmarks.

LED technology is part of a range of energy-efficient and lower-environmental-impact solutions provided by GE for the Rio 2016™ headquarters. The company also is responsible for state-of-the-art technologies used in energy security and electrical distribution. The building also uses 25 Uninterruptible Power Supply units supplied by GE Digital Energy, which continue the energy supply for 10 minutes in the event of a failure while the generators are turned on, preventing the interruption of work. Electrical distribution components also have been installed in the building, including circuit breakers, relays, plugs and other equipment from GE Industrial Solutions.

Efficient Technologies

LED technology is part of a range of energy-efficient and lower-environmental-impact solutions provided by GE to for the Rio 2016™ headquarters. The company also is responsible for state-of-the-art technologies used in energy security and electrical distribution. The building also uses 25 Uninterruptible Power Supply units supplied by GE Digital Energy, which continue the energy supply for 10 minutes in the event of a failure while the generators are turned on, preventing the interruption of work. Electrical distribution components also have been installed in the building, including circuit breakers, relays, plugs and other equipment from GE Industrial Solutions.

Both the LED Lumination Luminaires and the UPSs are part of GE’s ecomagination℠ initiative, which helps customers improve operational efficiencies while allowing a significant improvement in their environmental impact.

GE has been an official sponsor of the International Olympic Committee (IOC) since 2006. Its commitment to contributing to the quality of the Games led the company to announce, in August 2011, the extension of its sponsorship agreement until the 2020 Games. Since the beginning of this partnership, GE has done more than $1 billion in Olympic-related business.

GE’s Lumination™ LED DownLights Provide Customizable Lighting Design

The first led downlight of GE’s Lumination™ LED Luminaires, the DI Series offers easy customization through an ideal ambient lighting solution for high-end retail, commercial office, and hospitality applications. Featuring the breakthrough design of GE Lighting’s Infusion™ technology, users can easily select their preferred lumen output and color temperature to illuminate key products or focal points with the simple switch of an LED module.

Offering greater flexibility and future-friendly versatility than typical LED downlights, the GE Lumination LED DownLight modules can be quickly and effortlessly removed and upgraded in seconds through a twist-fit design that doesn’t require a fixture change. The Infusion technology provides outstanding efficacy and color rendering—including high R9 values across all color temperatures—which is ideal for retail settings, lobbies and other areas where the color, richness and detail of merchandise and key interest areas can pop.

Source: GE Lighting

Additionally, the energy-efficient DI Series is available in 4- and 6-inch round and square shapes that allow users to choose the perfect light for each application.

“GE Lumination LED Downlights provide dramatic illumination to any store, office or hotel,” said GE Indoor LED Product Manager John Koster. “At the heart of the design is the Infusion DLM downlight module, which uses a unique color-mixing technology to deliver 90+ CRI and very high R9 at all lumen levels and color temperatures without sacrificing efficiency. Better yet, the socketable module allows for easy upgrade as LED technology advances, ensuring the lowest total cost of ownership. Customers will finally be able to upgrade or service just the LEDs—tool-free—without having to change the entire downlight. With lumen package options from 1,000 to 4,000 lumens, the Lumination DI Series truly is the ideal LED alternative to everything from 13-watt CFL to 100-watt metal halide downlights.”

A product of GE ecomagination℠, the LED modules of GE Lighting’s Lumination LED DownLights come in a variety of lumen outputs, color temperatures and offer up to 90 CRI color rendering—ideal for 10-16-foot ceilings. Additionally, the DI Series has a 50,000-hour rated lifetime, providing considerable maintenance savings compared to 20,000-hour rated lifetime for many CFL downlights.

Learn more about Lumination LED lighting fixtures at www.ledpanel-light.com. Read more about GE’s commitment to innovative solutions to today’s environmental challenges at www.ecomagination.com.

RAB Lighting Introduces the LPANEL Line of Affordable LED Panels

RAB Lighting announces the availability of LPANEL, its new line of LED panel fixtures. Designed with high performance and affordability in mind, the new LPANEL products deliver ultra smooth edge-to-edge light in a modern design. LPANEL breaks new ground in efficiency delivering up to 106 lm/W.

RAB is serious about consistent color. The LEDs in PANEL fixtures are binned for 3-step consistency and are warranted for no more than a 200K shift over a 5-year period. At 10 hours average daily use, RAB LEDs are rated to last 27 years, which dramatically reduces the time and expense associated with re-lamping traditional fluorescent fixtures.RAB LPANELs are offered in three sizes (2x2, 2x4 and 1x4), three color temperatures (warm, warm/neutral and neutral) and several lumen packages to suit every application. Many LPANEL models are DesignLights Consortium® (DLC) approved and significant rebates can be obtained from local utilities. For even more savings, LPANEL is available with an optional dimmable driver that delivers full-range dimming from a 0-10V control signal.

RAB’s 5-year no compromise warranty covers light output, color stability, driver performance and paint finish. Simple, comprehensive and valuable, the RAB LED Warranty ensures that your investment is protected.

All LPANEL fixtures feature a modular splice box/driver compartment and integral T-bar clips for easy, secure installation. An emergency backup option is also available to provide emergency lighting when power is lost.

Rishang Malaysia to Launch LED Commercial Lightings in Malaysian Market

Rishang LED, the leading manufacturer of LED lighting modules and components in the world and renowned lighting brand, will be launching its wide range of products for the Malaysian market. Marketed through Rishang Malaysia, there will be all types of products that can be used in the commercial lighting sector of the local market segment that will cover commercial and private properties respectively.

Rishang Malaysia is the sole and exclusive distributor for Rishang LED products in Malaysia where the company will be involved in all areas of distribution, marketing, sales and support for the complete product line. This is a significant milestone for Rishang Malaysia which will see the rolling out of all types of commercial lighting modules, LED power supply, components and LED bulbs that are suitable for use in all spaces.

LED or Light-Emitting Diode lights have been one of the fastest growing technologies in the world especially through its known benefits which offer better cost savings in utility bills like electricity. Apart from that, LED lights can operate for a longer time up to 7 times more than conventional lighting. By emitting lesser heat, LED lights help the premise owners to depend less on cooling units like air-conditioning systems which will in the long-run provide more savings and making them the ideal replacement for conventional light bulbs.

Rishang Malaysia will be offering a wide range of LED bulbs in Malaysia which can be used in all types of environments. This product is highly energy-efficient and cost-effective which can be used for lighting, illumination, decoration and any other purposes required. The LED bulbs can be used for spotlights, wall-washers and in display cabinets as well as for customized purposes like garden and outdoor lighting in which the bulbs can be mounted into waterproof enclosures to withstand any type of extreme weather conditions.To launch the campaign, Rishang Malaysia will be bringing in popular modules like LED modules and LED strips for lightboxes and signages in Malaysia. In offering affordable options in this area, business owners who are using lightboxes and signages in their premises have a more economical and beneficial option. Rishang LEDs have been used in many businesses to replace fluorescent bulbs for signage purposes. The brand is currently being used by large corporations and organisations like AIA and the Pavilion Shopping Center in Kuala Lumpur. Apart from that, Rishang LED products are used in retail and convenience stores like 7-Eleven and many others.

Another popular product that business owners can consider through the launch is to replace the current fluorescent lights with Rishang Malaysia’s T5 and T8 LED tubes. These tubes are among the most commonly used and installed in many spaces where the dimension and length are identical. With minor adjustments, business operators can now enjoy up to 50% in electricity savings per month which would be highly advantageous in the long term.

Customers of Rishang Malaysia will enjoy technical support and customer service in terms of installation and on design. Pricing of the products are very competitive and based on the current market rate where bulk purchases will enjoy additional discounts. All Rishang LED products come with 5-years warranty with 1-to-1 exchange against manufacturer’s defects with no questions asked.

As part of this launch, Rishang Malaysia is inviting LED distributors from all regions around Malaysia to apply for exclusive distribution privileges. Entry into this market requires very low capital where Rishang Malaysia will be offering support in all areas. This includes providing the appointed distributor with a website for better online presence and e-commerce facilities for ordering of stock and other services. From there, Rishang Malaysia will facilitate all orders and make arrangements like logistics, delivery and technical support. Meanwhile, Rishang Malaysia will be responsible in the support of the distributor’s network through a well-planned and run advertising and promotions campaign throughout the year to ensure business growth for the partners.

On top of that, Rishang Malaysia is partnering with the Malaysian Advertisers’ Association through a collaborative programme which will be venturing into a major campaign to improve the Association’s services to its members. Rishang Malaysia will work with all parties involved to assist the Association in becoming more relevant and to play a more integral role for the enhancement and strengthening of the Malaysian advertising industry.

Intematix Introduces Remote Phosphor Product for 150W LED Retrofit Lamps

Intematix Corp, a leading innovator of patented phosphor solutions for high-quality LED lighting, today announced the volume shipments of their remote phosphor component that enables 150W equivalent LED retrofit lamps. This production release adds to the product family already enabling 40W, 60W, 75W and 100W bulb replacements all using a similar omnidirectional form factor.

As global government regulations phase out incandescent lamps, these remote phosphor components streamline access to high quality, efficient lighting in these popular lumen output ranges for use in residential and commercial applications. In addition, this innovative form factor delivers an incandescent-like 325 degree light distribution pattern in contrast to many LED replacement bulbs on the market.

“By applying this remote phosphor technology to the high end of the light bulb output range, we show 38% higher lumen output than bulbs available today,” said Julian Carey, Senior Director of Strategic Marketing at Intematix. “We are already seeing newly available, 2200-plus lumen LED light bulbs worldwide using this technology.”

Remote phosphor is a lighting system architecture where a separate phosphor component is powered by blue LEDs. LED light bulbs use this architecture and the increased light extraction it enables to reduce LED component count and costs. Lighting uniformity and consistency are also improved and supply chains are simplified. Intematix has launched this specific ChromaLit® Contour product with a light bulb reference design that includes the following features:

• Three-way switching mode up to 2200 lumens
• 2700K, 3000K & 5000K color temperature options
• Standard color rendering options of 80 and 90CRI
• 30 watts power consumption
• 325 degree, omni-directional light meeting ENERGY STAR® requirements
• Up to 25,000 hour lifetime
• 150W equivalent LED light bulbs utilizing Intematix’s patented ChromaLit remote phosphor are now available at major US retail outlets. 

Sony Announces Latest OLED Displays

Sony has come out with new professional OLED-based computer monitors. The new models (PVM-A250, 25" and PVM-A170, 17") are approximately 40% thinner in depth and 40% lighter in weight compared to previous Sony models. The newly designed monitors were the result of Sony completely re-engineering them. Sony reportedly made numerous changes from the chassis to the OLED panel module's structure to the signal processing board, material and parts. The monitors have also reduced power consumption by 9% compared to previous versions of its high-end Trimaster El OLED monitors.

"Higher resolution content creation – 4K and beyond – requires monitors with larger screen sizes for accurate color evaluation on site," said Daniel Dubreuil, senior product marketing manager, professional monitors, Sony Europe."But bigger monitors are harder to carry and take up more space. These new models have the screen size needed for critical evaluation, with a thinner and lighter design that’s perfect for live broadcast and outdoor shooting. They even have a handle for easy carrying."

The monitors improvements include an I/P conversion system that delivers automatically optimized signal processing according to input signals, with low latency (less than 0.5 field). The new monitors will be available in January, 2014. Retail prices for the 17" and 25" OLED monitors will be well over $4 thousand and $6 thousand respectively. So don't plan on having that monitor added to your gaming system unless you have lots of money to spend.

Samsung to Switch Flash LED Package Specs to 2016

Smartphones are driving up demands for flash LED. Aside from Philips Lumileds, Cree, Osram and other leading global manufacturers in the flash market, Taiwanese and Korean manufacturers are also entering the market. Samsung plans to switchits flash LED package specs from 4139 to 2016. Following various manufacturers  production launch, industry insiders estimate larger price cuts for flash LEDs in 1Q14.

For flash LEDs to emit light, it requires high currents in a very short period of time.    In smartphone applications, the size of the flash LED must also accommodate available space. Following smartphone camera specs upgrades; flash LED brightness has also increased, going from 75 lm to 500 lm. The industry believes that the main 2016 specs for flash LEDs will be extended into 2014, and overall brightness and current voltage will also continue its upward climb.

The global flash LED market is still largely led by Philips Lumileds, Cree, and Osram. Following smartphone flash LED upgrade to dual-flash, the industry anticipates continued growth for flash LED. Taiwanese manufacturers including chip manufacturer Genesis Photonics, package manufacturers Everlight and LiteOn Technology are all aiming to enter into the flash LED supply chain. Everlight has already snatched a hefty market share since its product entry into  China’s smartphone supply chain. Samsung, which previously used in-house package specs, is also taking into consideration its export market, and planning a major shift into the2016 LED market.

As far as flash LED specs are concerned, 2016 is the main spec used in smartphone flash applications. Previously, Samsung mostly used 4139 LED combined with LED package components, optical reflectors, and second optic lens. In smartphone applications, 4139 LED requires more space due to its larger size compared to 2016. Therefore, aside from Samsung smartphones applications 4139 is rarely used in smartphones. 

Samsung is planning to expand flash LED exports, and hopes to switch to 2016 specs, according to LEDinside understanding. With more  manufacturers entering the flash LED market, industry insiders believe that the current price for a single flash LED unit will continue to drop from US $0.25. It is projected flash LED prices slides will escalate in 1Q14.

Dialog Semiconductor Introduces New SmarteXite Technology Platform for Intelligent LED Lighting

SmarteXite enables solutions for digital dimming, wireless control and sensor control while supporting unprecedented time to market, optimised LED bulb quality and production yields

Dialog Semiconductor plc, a provider of integrated power management, AC/DC, solid state lighting and short-range wireless technologies, today announced its smarteXiteTM platform, enabling a new generation of highly flexible, programmable LED driver ICs for smart lighting applications. SmarteXite, based on fully configurable logic, is the first LED driver technology to directly and easily support wireless connectivity, light sensor control and allow easy integration into lighting control systems.

The first device from the smarteXite family, the iW6401, supports multiple dimming interfaces, including digital dimming via a simple main on/off switch, the new Ledotron(TM) digital dimming protocol and toggle-switch based dimming. All dimming-curves can be memory-configured to enable a highly optimised end-user lighting experience. The integrated digital loadline transmission (DLT) receiver in the iW6401 supports the Ledotron IEC 62756-1 dimming protocol, making it the world's first single-chip plug-and-play Ledotron solution.

Using a standard I2C digital interface, the iW6401 can serve as a powerful frontend for wireless communication modules like low-energy Bluetooth, Wi-Fi or ZigBee. Additionally, intelligent sensor devices enabling color- or proximity-sensing can be directly connected. When such a peripheral device is used, the integrated power management unit in the iW6401 provides a stable power source, reducing the external component count and cost.

Combining Dialog's strengths in configurable power management with state-of-the-art digital signal processing design, the iW6401 is the world's first programmable AC/DC retrofit LED lamp driver IC, which allows engineers to design and configure the bulb design via software with an optimised bill of material (BOM) versus a time intensive iterative hardware design process. This greatly reduces the time to market and allows a smarteXite-based design to support many different global configurations and lighting requirements.

'Solid state lighting components and manufacturing costs have fallen to a level enabling LED bulbs to be sold in retail stores for under 10 dollars; this price point drives consumers to adopt the technology and retrofit their homes,' said Mark Tyndall, VP Corporate Development & Strategy and GM Power Conversion Business Group at Dialog Semiconductor. 'Market analyst firm McKinsey predicts a 57 percent compounded annual growth rate for LED bulbs units to be sold between 2012 and 2016, with more than 2.6 billion units to be sold in 2016.'
SmarteXite supports final stage digital calibration on the production line where the bulb manufacturers can reconfigure the illumination calibration settings like brightness and colour via the A/C mains terminals. This allows lower tolerance LEDs to be used with less binning or waste of LED's. Additionally, using this final stage calibration feature, the adjustment of the LED currents can be done even in the installed state, making the smarteXite platform also ideal for Zhaga compliant power supplies. The iW6401 can be configured to actively manage the lamp temperature using either an on-chip or off-chip temperature sensor together with configurable state temperature control.

LEDs are especially suitable to be dimmed in a wide range. Unlike CFLs and other discharge lamps, LEDs can be set to almost zero current by applying digital control principles. With smarteXite, intelligent control algorithms can be employed and configured to provide a wide dimming range. Additionally, the smarteXite platform offers a range of protection and supervision functions, which can be customised for the different lamp requirements.

Everlight Flash LED Breaks Into Japanese Smartphone Supply Chain

Dual-LED Flash is hoped to become a trend in smartphone application. Taiwan LED manufacturer Genesis Photonics and Everlight have both recently announced their entry into the Japanese smartphone supply chain. LED package manufacturer Everlight, which already has a strong Taiwan, China, Europe, and North America client base, has announced once again its entry into the Japanese smartphone flash LED supply chain . Flash LED designs will feature both warm white and white lights.

Following Apple iPhone5 incorporation of flash LEDs in their design, dual-LED flash is hoped to become a trend. After Taiwanese LED chip manufacturer Genesis Photonics introduced flip-chip technology into the Japanese smartphone flash supply chain, Everlight announced its entry into the supply chain as well. Everlight will use both white and warm white based lights for the flash LED design.

In regards to Everlight’s revenue distribution, the largest portion is made up by backlight products and lighting products at 25 percent each and SMD products which have dropped down to 30 percent. Application in consumer electronics is categorized in the SMD product line. Additionally, infrared ray products make up 15 percent and other products make up the last 5 percent.

Litek retrofits lighting in Venice, customizes LEDs for legacy look

Venice, Italy is one of those historical cities where change is not necessarily welcome, especially if it changes the iconic look and the feel of the place, and the Commission for the Architectural and Landscape Heritage was intent on ensuring that new lighting match the old. But the city, like many, needed to reduce energy consumption attributable to nighttime lighting and turned to Litek to shepherd a retrofit project that took four years of testing. Now Litek has retrofitted 7000 existing fixtures with LEDs, delivering 81.4% energy savings.

Lighting in Venice is especially important to the aesthetics and ambience where pedestrians stroll in the piazzas and along canals and admire the unique architectural structures. For example, famed Piazza San Marco was the heart of the project. "In the evenings or at night, one's perception of the notable architectural structures in the piazza, including the Basilica de San Marco, the Torre dell'Orologio, and the Palazzo Ducale, is keenly affected by the lighting," said Mark van den Berg, director of marketing at Philips Lumileds. "For this reason, it became necessary to maintain the exact light quality that was delivered by the mercury discharge lamps of the past, when they were replaced by energy-efficient LED lamps."

After the extensive testing, Litek used Lumileds Luxeon K LED arrays with custom designed optics to replace the mercury-discharge lamps with solid-state lighting (SSL) modules. That retrofit encompassed 6000 post-top luminaires. The selected LEDs deliver 3000K-CCT, 80-CRI light that matches the prior lighting while eliminating maintenance issues and saving energy. Litek projects that the lighting will last 50,000 hours, equating to almost 12 years based on 11 hours of use each night.

The project also included additional lighting along the Grand Canal, across the Accademia Bridge, and in the Rialto shopping area. In that area halogen lights in a warm CCT had been broadly used. Litek developed and installed retrofit modules for 1000 fixtures in those areas that use Luxeon M LEDs, again at 3000K CCT.

The local utility has documented a reduction of 75 kW of power annually. As the nearby photos document, the Piazza San Marcos retains its classic look de

The Seoul government will all use LED Lighting

Recently, the South Korea capital Seoul has announced plans to invest to install more LED Lamps and lanterns in public places, and encourage the private sector to futher expand the scope of installation. 

Public places such as subway stations and streets, the municipal government plans to use LED Lighting all before 2018, in the hope to reduce energy consumption and aid the LED lighting industry.

For more information about LED Lighting industry, pls visit:http://www.ledpanel-light.com